The following listing illustrates main ECC products:
	Ordinary Portland Cement
	This type is produced by pulverizing clinker consisting essentially of hydraulic calcium silicate and containing one or more forms of calcium sulphate as an inter ground addition. Application: The product has been designed to give enhanced concrete properties in the fresh "wet" state with adequate high early strength levels upon setting and hardening. Storage: Cement will not deteriorate significantly if it is protected from exposure to moisture (humid air, rain condensation, etc). If cement is allowed to absorb moisture, its setting time is increased and loss of strength will occur.
	Sulphate Resisting Cement
	Sulphate Resisting Cement is a dark colored Portland Cement manufactured from clinker of low C3A content and undergoes grinding with a reduced proportion of gypsum than Ordinary Portland Cement. Application: Use in concrete exposed to severe sulphate action where soil or ground water have high Sulphate content Storage: Cement will not deteriorate significantly if it is protected from exposure to moisture (humid air, rain condensation, etc). If cement is allowed to absorb moisture, its setting time is increased and loss of strength will occur.
	High Slag Blast Furnace Cement:
	High slag blast furnace cement is a product which has a normal blast furnace slag content of 75%. It is manufactured by intergrinding high quality granulated blast furnace slag with cement clinker and gypsum. Application: The product has been designed to give enhanced concrete properties in the fresh "wet" state with adequate high early strength levels upon setting and hardening. Storage: Cement will not deteriorate significantly if it is protected from exposure to moisture (humid air, rain condensation, etc). If cement is allowed to absorb moisture, its setting time is increased and loss of strength will occur. ECC has the ability to produce any type of cement upon request and according to economies of scale.